A piston pump & motor is a type of reciprocating pump that moves and pressurizes fluid by using one or more reciprocating pistons; it is typically driven by an electric motor through a crankshaft and connecting rod. Though there are many types, all piston pumps feature at least one piston moving in an enclosed cylinder.
Hydraulic piston parts are disc or short cylinder fittings closely within an engine cylinder in which they move up and down against a liquid or gas, used in an internal combustion engine to derive motion, or in a pump to impart motion. A piston is a component of reciprocating engines, reciprocating pumps, gas compressors, hydraulic cylinders, and pneumatic cylinders, among other similar mechanisms. It is the moving component that is enclosed in a cylinder and made gas-tight by piston rings. In an engine, its purpose is to transfer force from the expanding gas in the cylinder to the crankshaft via a piston rod and/or connecting rod.
The hydraulic piston pump is an important device in the hydraulic system. It relies on the reciprocating movement of the piston in the cylinder block to change the volume of the sealed working chamber, to achieve oil absorption and pressurisation.
Hydraulic piston motor is used to drive mobile and construction equipment, winches, ship-cranes, and all kinds of heavy-duty hydraulic equipment for offshore and onshore operations. Piston motors are hydraulic motors with a high speed and displacement range that operate under maximum pressure of up to 450 bar.
Piston parts for Rexroth bring new life to old hydraulic pumps with new hydraulic pump spare parts, Allow users and hydraulic maintenance companies to get fast service, save money for users and people, and allow hydraulic service companies to bring better profits and improve timeliness. And all this spare parts with top quality and 100% replacement with Kawasaki original. The parts include piston, cylinder block, valve plate, saddle bearing, shaft, retainer plate, ball guide, swash plate....
Hydraulic systems are incredibly complex and all vary slightly depending on their intended use.Every system must contain 7 different basic hydraulic parts for Kawasaki in order to function correctly. These are a reservoir oil tank, pipes, a hydraulic pump, a power source, an actuator, valves, and filters.
The piston parts for Sauer Danfoss, as the moving part of the combustion chamber, has the task of converting this released energy into mechanical work. The basic structure of the piston is a hollow cylinder, closed on one side, with the segments piston crown with ring belt, pin boss, and skirt.
Piston pumps for Caterpillar are a type of reciprocating pump that moves and pressurizes fluid by using one or more reciprocating pistons. Three main components can always be found in every piston pump; a piston, a crank, and inlet and outlet valves. The piston is the main source for allowing the liquid to flow in and out through the valves.
Hydraulic pumps for Volvo for its operation uses hydraulic pumps operating under high pressure up to 350 MPa. This system uses the principle of alternately filling the working chambers of the pump and the hydraulic motor with a hydraulic fluid and displacing it from there under high pressure. The speed of movement of the working fluid in such a system is small. The main factor of the system is pressure. The volumetric hydraulic drive in physical dimensions is more compact and has received wider application than hydrodynamic.
Cast iron gear pumps and motors are high pressure and fixed displacement hydraulic pumps and motors which are widely used for construction machinery, agriculture machinery,mining machinery, oil machinery and so on.
Protective Suit factory Products Description NameMedical Protective Gown Size160cm, 165cm, 170cm, 175cm, 180cm, 185cm or customized Material/FabricSMS or PP&PE (standard material for medical protective clothing) StructureJumpsuit structure, consists of a hooded top and trousers. Scope of applicationSuitable for clinical staff to provide barrier & protection in the work environment with the patient's blood, body fluids, secretions. CharacteristicsThis product has two types of sterilization and non-sterilization; It can be used in hospital; It can effectively resist the penetration of bacteria, viruses, alcohol, blood, body fluids, air dust particles, can effectively protect wearer from the theat of infection. It's made by designated factory of government procurement with reliable quality with competitive Price. Ways to wear protective clothing1) Expand protective clothing; 2) Pull the zipper apart; 3) Put into the legs from the zipper opening in turn; 4) Wear upper coat 5) Stick hands out of sleeves; 6) Wear hooded; 7) Pull the zipper from the front of the chest; 8) Tear off the off-type paper on the double - sided adhesive and press the seal from top to bottom. Product Show Details Images Press Seal Stitchout with glue hot-reinforced treatment, waterproof and impermeable. Retractable hood Retractable hood, tight wrap, overall protection. Waist tightening Suitable for people of different body types, free adjustment & not tight Protective way after zippering Tear off the off-type paper on the double - sided adhesive and press the seal from top to bottom. Protective Suit factory website:http://www.aitosens.com/protective-suit/